How to Keep Water From Pooling on Patio Furniture Cover

If you’ve ever had water pooling on the patio furniture cover, you know that it can be a frustrating problem. In this blog post, we’ll provide tips on how to keep water from pooling on patio furniture cover and explain the best ways to deal with water that has already pooled on the cover.

We’ll also provide tips on how to properly dry out a wet patio furniture cover so that you can enjoy your furniture without worry. So, read on for helpful tips and advice.

The Factors That Lead to Pooling Water

Pooling water on patio covers can occur for a variety of reasons, including:

1. Insufficient Drainage: Patio covers may not be properly installed or designed, which can lead to pooling water on the cover due to inadequate drainage.
2. Poor Air Circulation: The cover may not be able to circulate air effectively, which can cause moisture levels to increase and pool on the cover.
3. The Amount of Rainfall: Heavy rainfall can cause water to pool on patio covers, especially if the covers are not correctly installed or if they are not waterproof.
4. Obstructed Sunlight: Wind or other elements may block sunlight from reaching the patio cover, which can cause it to become wet and susceptible to pooling water.
5. Damaged or Defective Components: Pooling water on a patio cover may be caused by damaged or defective components, such as a faulty seal around the cover’s perimeter or leaks in the roof system that allows water to collect and accumulate on the cover.
6. Unsafe Conditions: If the patio cover is located in an unsafe or precarious location, such as next to a steep slope or near a water body, pooling water may be more likely to occur.

When these conditions are present, the water accumulates on the patio cover and eventually seeps through the fabric and saturates the ground below.

In order to prevent pooling water from building up on your patio cover, it is important to take measures to ensure proper air circulation and rainfall circulation, as well as effective drainage. Additionally, consider using a patio cover that is designed specifically for wind and rain protection rather than one that is simply made out of fabric.

Why Stop Water From Collecting On Patio Furniture Cover?

If you don’t keep the water from pooling, it can cause water and weight damage to the covers. The performance of these products could be hindered by this, resulting in a diminished ability to guard your belongings against the elements.

Damage the Cover

Maximum patio or garden furniture covers are water resistors. Reversing a situation can be difficult and sometimes irreparable. It can cause cover damage if it gets waterlogged for a long time. So, keep an eye on the eyes there. Check it regularly.

Water might become rather heavy if it accumulates on the furniture cover. Sagging may occur due to the weight of the water on the cover.

Damage the Furniture

If your cover has any leakage, it may also cause furniture damage. If water is left in a pooling state for an extended time, it may leak through. The structural integrity and aesthetic appeal of your patio furniture will be compromised by exposure to water, resulting in corrosion, warping, mold, and mildew growth.

The weight of the water might put strain on the frame of the furniture over time, forcing it to become slightly deformed.

How to Keep Water From Pooling on Patio Furniture Cover?

Here, we share five ways to keep water from pooling on the patio furniture cover:

1. Employ Fitted Covers

Water pooling can be effectively prevented by ensuring that the covers are tight and fittingly snug. You will not have to fret about the extra gathers on the seat areas or excessive material ready to burst on the seats.

The diagonally fitted covers are a fantastic option, as they don’t interfere with the seat areas of the sofa and yet provide a snug fit.

2. Placing Items Like Buckets and Stands

Before securing the cover on the patio furniture, position a small bucket beneath and affix it. By forming a tent shape for the cover, this design creates slanting slides that facilitate easy water drainage. Your furniture may get weighed down by placing buckets on top of it. Still, this method’s additional moisture absorption will help alleviate water damage and prevent stains from becoming more persistent.

An elevated center table higher than surrounding chairs can achieve a higher center, resulting in a naturally elevated center. The seat bucket’s cover is maintained by the sloping cover, preventing water from accumulating on top.

3. Covers That Are Self-draining

Using customized covers, some manufacturers can prevent water from accumulating on furniture. These covers differ from conventional furniture covers in their shape and design. Water can slide off instantly due to the added diagonal form in the front of self-draining coverings.

4. Use of Water-shedding Poles

The suggestion in this piece is our favorite, using water-shedding poles keep your furnishings without any contact with the covers. In addition, if you manage the cover properly, the flat top will not get flooded with water. You can arrange it.

The support pole of the patio furniture set with a parasol hole can easily fit inside the cover. This support pole makes it easy to support and drain the water from the sides.

5. Self-cleaning Surfaces

The latest in furniture covers from some manufacturers is designed to preserve the look of sofas and patio furniture regardless of how frequently they are utilized. These covers have been crafted to prevent water from accumulating, and the furniture remains protected beneath.

How Can You Properly Dry Out a Wet Patio Furniture Cover?

Drying out a wet patio furniture or garden furniture cover is essential to prevent mold and mildew growth, as well as to maintain the longevity of the cover. Here are some steps that you can follow to dry out a wet patio furniture cover properly:

1. Remove the cover from the patio furniture and shake off any excess water. If the cover is heavy, you may need to take the help of another person.
2. Lay the cover flat on a clean, dry surface, such as a clean driveway or a clean patch of grass. Avoid putting the cover on a surface that is dirty or wet, as this could cause the cover to get even dirtier or wetter.
3. Blot the surface of the cover with a clean, dry towel, absorbing as much moisture as possible. Depending on the size of the cover, you may need to use multiple towels.
4. If it’s a sunny and dry day, place the cover in direct sunlight to help it dry out faster. Alternatively, you can hang the cover on a clothesline, making sure that it is stretched out evenly.
5. If the weather is not conducive to air-drying the cover, you can use a fan to help speed up the process. Place the cover near a fan and wait until it is completely dry.
6. Avoid using a dryer or a heat source to dry the cover, as this could cause the cover to shrink or melt.
7. Once the cover is completely dry, fold it neatly and store it in a dry, cool place until you need it again.

By following these steps, you can ensure that your patio furniture cover dries out properly and stays in good condition for as long as possible.

Factors to Consider When Selecting Patio Furniture Cover

Despite being crucial, we must emphasize more the necessity of a customized cover if you have yet to acquire one or are about to replace your current one.

Prioritizing the right cover selection. When you go to a custom fabricator, rather than having a prefabricated cover guaranteed to prevent pooling issues, it is typically the case that these issues arise. Before you make the trip, confirm the accuracy of this claim, as it may not always be true.

Material of the Covers

The material of the covers plays a significant role in determining the overall design. If you have chosen PVC or tarpaulin to keep your furniture dry, you may be in for an unpleasant surprise. The materials can be susceptible to water leaks if water wells are placed on top, causing the shade of the tarpaulin or PVC to fall on furniture. A shed-like cover can be used above your patio to keep your furniture from being damaged by the elements.

Sizing of the Cover

The size of the outdoor furniture cover is critical in ensuring that the cover adequately protects the furniture. Properly sized furniture coverings, raised a little above the ground, allow for optimal air circulation and prevent the growth of mold and mildew.

Elimination of Access to Water Resources

Water protection is important for patio covers, and some models offer a degree of protection. Though they offer greater water protection than water-resistant covers, waterproof covers can have issues with breathability.

Breathability

Vinyl patio furniture covers are not as breathable as those made of organic material. By creating openings in the furniture cover, you can increase the level of airflow through the cover.

Prevent Movement of Weight

The patio furniture cover can be tied by tie-downs to ensure maximum security. We have written an in-depth guide on securing outdoor furniture covers if you want to learn more about this topic.

This design eliminates the possibility of covers blowing away by providing a snug fit that eliminates water-pooling pockets and prevents covers from blowing away in windy conditions.

Conclusion

Hopefully, now you have learned how to keep water from pooling on patio furniture cover. By following these tips, you can ensure that your patio furniture will stay in good condition and that water will not be an issue.

Lastly, remember that regular inspection and maintenance can help extend the furniture’s and the cover’s lifespan. Thanks for reading!